Installing an interior door is easy upgrade that can dramatically improve the appearance of your home.
Jeld-Wen published a video to Show you How to Replace an Interior Door
Here's a list of the tools you'll need to complete the project
Four Foot level
Hammer or Nail Gun
Don't forget to wear a proper eye protection when using hand tools
Step 1 Measure Opening
Once you remove your old door frame, take the opening measurements and give them to your local home improvement retailer. They'll be able to assist you in choosing the right size product for your home.
Step 2 Check Measurement
When you receive your new interior door you'll need to remove the packaging. Measure the door and component pieces to ensure the product is the right size.
Step 3 Paint Door
Interior doors come pre-primed so this is a good time to put up a coat of paint on the door and component pieces.
Step 4 Build Frame
Place the door and component pieces on the ground with the hinge side down and align the strike j
Step 5 Position Door in Opening
Position the door in opening and place temporary shims to secure it into place
Step 6 Level Door with Shims
At this point make sure the door is level and plumb. You’ll also want to ensure proper spacing along the door opening about 1/8 inch and adjust the shims accordingly
Step 7 Fasten Jamb with Finishing Nail
Once the door is positioned correctly, fasten the jam with finishing nail. Start on the hinge side. Work your way around the door nailing the frame through the shims.
Step 8 Secure Door Stop
Secure the remaining door stop to the strike jamb
Step 9 Remove Shims and Install Trim
Sore and break off the remaining shares and replace the old trim
Step 10 Install Hardware
Finally install the door hardware according to the manufacturer's instructions.
That’s it! You’ve successfully installed a new easy-install interior door in your home
Don't forget to check out other job when installation videos at Jeld-wen.ca